|Working principle: |
Its motor is controlled by frequency speed controller and it moves the drum through
driving system to spin round the main axis to form centrifugal field of force.
The liquid material enters the separating area directly from one side of the drum.
Under affection of centrifugal field of force, the liquid material is thrown
towards the wall of the drum, and then the liquid enters machine shell through
filter cloth and the hole of the wall and falls down on the bottom of machine to
discharge through outlet hole. The solid phase leaves in the filter cloth. The
thickness of material is controlled by a special detector of material location.
Water is poured through the washing tube to wash the material. After dewatering,
the drum slows down and the solid phase is scrapped away by scraper then discharges through the outlet located in the drum. The parts of the machine touched with material use stainless steel, carbon steel, and titanium alloy.
It is used to filter suspension where solid phase is particle, especially suitable
for the poisonous, inflammable, explosive, corrosive material and working environment.
Well not for textile with long fabric and others that not easy to scrap.
1) The drum of main machine is controlled by frequency speed controller
2) Non-explosion protection for the whole machine: the main machine adopts
full-closed filling nitrogen gas system, on-the-spot operating cabinet and
hydraulic station, safe and flame-proof, which is specially suitable for
inflammable, explosive and corrosive material and working environment
3) When feeding, the location of material is monitored by radio frequency
admittance sensor produced in America without the possibility of
4) PLC auto control, with DCS nipple, the whole operating processes of
centrifuge can be controlled automatically
Please use contact form for send message directly to seller. Your message will be sent directly to the recipient and will not be publicly displayed.