|
|
|
 |
117pc Tool Set
We can provide high quality tool sets. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Asepsis Spray Drier
The drying device with asepsis and spray is a key equipment for manufacturing power injection in pharmaceutical industry. Many antibiotics, such as streptomycin sulfate, gentamicin sulfate and kanmycin sulfate, need the drying device with asepsis an...
|
 |
Two-Deck Tool Boxes
Features: 1) Sizes: a) 380: 15 (380 x 200 x 180mm) b) 430: 17 (430 x 230 x 200mm) c) 450: 19 (450 x 243 x 210mm) 2) Material: ABS If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
155pc Tool Set
We can provide high quality tool sets. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Self-Drilling Tapping Screws
Features: 1) All sizes 2) Raw material: steel - stainless steel - brass 3) Class: Cl 5 to Cl 10 4) Coating: zinc - dacromet - hot deep galvanized Inner packing: Color box or blister card Outer packing: Carton If this offer has interested ...
|
 |
Single-Phase Economy Meters, Three-Phase Electric Meters
Model SE1-3.1, 3.2, SE1-3.3 single-phase economy meters: 1) Reference voltage: 3 x 220 / 380V, 3 x 380V, 3 x 100V 2) Basic current: 3 x 1.5 (6) A, 3 x 20 (80) A, 3 ? 30 (100) A 3) Reference frequency: 50 or 60Hz 4) Magnetic repulsion: lower bearin...
|
 |
Resion Bond Diamond Grinding Wheel
Features: 1) High cutting capability with low grinding forces in dry and wet grinding 2) With phenolic polyimide resin base 3) Extreme flexibility If this offer has interested you, please, fill the form of inquiry and you receive the answer i...
|
 |
Open or Close Eye Screws
Features: 1) All sizes 2) Raw material: steel - stainless steel - brass 3) Class: Cl 5 to Cl 10 4) Coating: zinc - dacromet - hot deep galvanized Inner packing: Color box or blister card Outer packing: Carton If this offer has interested ...
|
 |
Single-Phase and Three-Phase Series Static Meters
Model SE1-4, SE1-5, SE1-6 single-phase meter: 1) Voltage: 220, 230, 240 2) Basic current::15 (60), 20 (80), 30 (100) A 3) Reference frequency: 50, 60Hz 4) Conditions: a) Ambient temperature: -35 ...
|
 |
6-Piece Carbide Burr Set
Features: 1) 6pcs/set 2) Shank diameters: 6mm, 6.35mm 3) Models of the tools: J1210, D1210, C1225, E1220, G1225, N1223 4) Use for shaping, smoothing and removal hardened steel, stainless steel, cast irons, nonferrous metals, fired ceramics, plas...
|
 |
Timing Pulleys
We can supply timing pulleys with high quality and timely delivery. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Drywall Screws And Chipboard Screws
We can supply a varity of screws. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
COMS Inverter DC Pulse GTAW/TIG Welder
Specifications: 1) Rated input voltage: 220V 2) Frequency: 50/60Hz 3) Rated input capacity: 4.5KVA 4) Open circuit voltage: 43V 5) Rated output current: 200A 6) Duty cycle: 60% 7) Efficiency: 85% 8) Arc strike mode: HF 9) After flow time...
|
 |
Hardware Parts
We can supply high quality hardware parts in different specifications. If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Thickness Gauge
Features: 1) Thickness gauge 2) Precision: minimum scale= 0.1mm 3) Head touch material: steel ball 4) Available pathway: 0~20mm Inner packing: Bubble box Outer packing: 50pcs/ctn Carton dimensions: 43 x 35 x 32cm If this offer has inter...
|
 |
Car Emergency Tool Set
Each set includes: 1) Clear triangle nylon bag 2) Booster cable 3) Funnel 4) Torch 5) Battery 6) 2-head screwdriver 7) Reflective vest 8) Snow scraper 9) Slip-joint pliers If this offer has interested you, please, fill the form of inq...
|
 |
Al Plate
This is a parts for the machine as drive and idle parts If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Aquarium Pumps &Pond Pumps
Features: 1) Models: AP300, AP333, AP355, AP399, AP388 2) Delivery volume: 150L/H to 25,000L/H 2) Delivery head: 50cm HMAX to 8,000cm HMAX 3) Certificate: CE, GS, UL, CUL, BS, SAA, PSE If this offer has interested you, please, fill the form of ...
|
 |
Ql-2700 Electrical Power Pressure Cleaner
Features: 1) Modal: QL-2700A 2) Flow: 11L/min (3GPM) 3) Pressure: 2,700Psi (180bar) 4) Rotation: 1,450rpm 5) Power: 6.5HP (4k W) 6) Optional pump: M11.18 7) Drive method: direct 8) Tires: 14 pneumatic 9) Delivery hose: 10m (500kg/cm) ...
|
 |
Micro Processor Temperature Controllers
Features: 1) Many kinds signals, such as thermal couple, thermal resistance 2) Can input freely, and also can set range freely 3) High performance and reliable intelligence ability 4) Software zero set co-alignment 5) Single cooling zone thermal...
|
 |
Roll Mould Table
Features: 1) Diameters: hi;2.0, 2.7, 3.0, 3.5 2) Material: excellent stainless steel If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Horizontal Convey Machines
Features: 1) lf-designed driving structure controls lifting and stopping, changing convey direction and quantity on-line at the real time 2) Transportation by stand-alone nearly makes no destroy, and lose ratio of sauce falls by 70% 3) Distribut...
|
 |
TV Front Cover Mould
Our company can supply most kinds of moulds, including electrical housing appliances, TVs, air-conditioners, refrigerators, cleaners, washing machines, etc. If this offer has interested you, please, fill the form of inquiry and you receive the answ...
|
 |
Locknuts
We can produce most of associated products relating to electrical conduit. And also manufacture the simple and easily using bender. We wish every potential customer can contact us to get more information of our products. Our main products are: 1) EMT ...
|
 |
Sun Gear
Features: 1) Specification: 6/20 2) Performance: used for the car loader bridge 3) Material: forging Packing: Ordinary packing Size: 150 x 150mm If this offer has interested you, please, fill the form of inquiry and you receive the answer...
|
 |
Linear Sterilizing And Rinsing Machine (Hb-yys-300-2)
Features: 1) Specially used for producing 5-gallon bucket drinking water 2) Models (b/hr): 60, 100, 150, 200, 300, 400, 600, 900 3) Made up of washer, filler and capper 4) There are several courses of flushing with sterilizing liquid 5) The ster...
|
 |
Electric Air Compressor
Specifications: 1) Air compressor speed: 3,400rpm 2) Max. pressure: 0.8MPa 3) Air flow rate: 0.11m 3/min 4) Air tank capacity: 16L 5) Power: 1.1k W 6) N. W.: 24kg 7) Dimensions (L x W x H): 400 x 355 x 475mm 8) Voltage: 120V 9) Frequency...
|
 |
3pc Lock Installation Kit
Each set includes: 1) 2-1/8 lock hole cutter 2) 7/8 power auger bit 3) 5/32 Allen key If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Claw Hammer with Plastic Handle
Features: 1) American type claw hammer with plastic-coating handles 2) Carbon steel drop forged, mirror polish 3) With good quality fiberglass handles and plastic cover 4) Size: 8oz, 12oz, 16oz, 20oz, 24oz If this offer has interested you, please...
|
 |
Laminator, Laminating Machine (330-6R)
Specifications: 1) Model: FGK 330-6R 2) Laminating speed: 300 - 1,500mm/min 3) Max. laminating width: 330mm (A3) 4) Laminating thickness: e;1mm 5) Operating temperature: 51 - 160 eg; C 6) Heating method: hot roll 7) Control system 8-bit mic...
|
 |
6 Heads Linear Electrical Steelyard
Suitable for automatic measuring of small granule materials and powder material with well fluidity, such as granulated sugar, condiment, seeds and so on. Specifications: 1) Speed: 20-60 times/min 2) Weigh range: 10g-3,000g/time If this offer has in...
|
 |
Sleeve Label Machine
Features: 1) Capacity: 3,000 - 24,000b/h 2) Bottle diameter: 50 - 126mm 3) Label height: 40 - 200mm 4) External size: 1600 x 900 x 2360mm 5) Applicable scope: PE, PP, PC If this offer has interested you, please, fill the form of inquiry and...
|
 |
HSS Straight Shank Twist Drill Sets
Diameter set Per unit 1 - 13 x 0.5mm 25 Finishing code: 01 Black finishing 02 Polishing 03 Tin coated 04 Fully ground 05 Fully ground and tin coated If this offer has interested you, please, fill the form of inquiry and you receive the ...
|
 |
RL Verticalscrew Measuring and Packing Machine System
Features: 1) Uses screw machine to complete measuring, filling and nitrogen charging, suitable for fluid powder materials or those hard to flow 2) Uses servo system with the merits of high precision, stable performance and so on 3) Stainless ste...
|
 |
Food and Beverage Machine
In order to meet the filling requirements for large-scale and medium-scale wine producers, we have independently developed the washing, filling and sealing 3-in-1 filling machine group. The capacity is 8000-12000 bottles per hour. If this offer has int...
|
 |
Measure Tapes
Features: 1) Measuring tape with rubber cover with three stop 2) Made form carbon steel with the metric system and inch graduation 3) Best materials of the plastic case 4) Logo immediate printing on body 5) Sliding blister card packing or displa...
|
 |
Roll Laminator, Laminating Machine (1100)
Features: 1) 8-bit microprocessor control system 2) Hot roll technology 3) Hot and cold laminating for different need 4) Digital display system 5) Adjustable motor speed according to different materials 6) Reverse button removing jammed films ...
|
 |
T. C. T. Circular Saw Blades (For Wood)
Part no. Diam. Kerf ID Teeth Angle(o) PW0301105 105 1.8 - 2.2 16 - 20.4 20 - 40 15 PW0301110 110 1.8 - 2.2 16 - 25.4 20 - 40 15 PW0301125 125 1.8 - 2.2 16 - 25.4 30 - 40 15 PW0301150 150 2.0 - 3.0 16 - 25.4 24 - 60 15 PW0301180 180 2.0 - 3.0 16 ...
|
 |
Steel Wire Cup Brushes
Specifications: 1) Diameter: 65, 75, 85, 90, 100, 125, 150mm 2) Nut: M14 x 2, M10 x 1.25, M10 x 1.5, 5/8 -11 or customized size 3) Materials: a) S: i) Gray carbon steel wire crimped ii) Fill types: 0.30mm, 0.35mm b) BS: i) Brass coated ste...
|
 |
Cold Roll Laminator
Features: 1) Model: DTS 160cm 2) Max. laminating width: 1,600mm 3) Max. laminating thickness: 10mm (general); 20mm (special) 4) Max. laminating length: unlimited 5) Operating method: auto 6) Dimensions: 1,730 x 200 x 400 mm If this offer has ...
|
 |
Pillow Packing Machine System (RX600)
Main performance and functional characteristics: 1) Equipped with safety protections, conform to film's safety management requires 2) Use PLC programmable controller and LCD to make the work state much more clear 3) High precision photoelectric eyes...
|
 |
Hot Shrinking Machine
Hot shrinking packing machine consists of seven actuating motor. Through cooperation between the 7 actuating motor to form the product packed with plastic film and several bottles as a group come out from the hot shrinking packing machine. If this of...
|
 |
Dry Cutting
Part No. Diam. Teeth thickness Teeth height ID Plate material PW0401105 105 1.7 7 16/20/22.23 1.2 PW0401110 110 1.9 7 20/22.23 1.4 PW0401115 115 1.9 7 22.23 1.4 PW0401125 125 1.9 7 22.23 1.4 PW0401150 150 2.0 7 22.23 1.4 PW0401180 180 2.2 7 ...
|
 |
Stainless Steel Threaded Ball Valve
Features: 1) Size: 1/4 - 4 2) Type: 1PC, 2PC, 3PC 3) Thread type: BSPT, NPT, DIN2999 4) Stainless steel welded ball valves are available If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
Catron Sheet Cutting Machine
Usage and features: 1) Suitable for material in roll to lengthwise and transverse cutting, including golden and silver paperboard, chrome paper, white cardboard paper, plastic slice material, etc. 2) Its electrical part is composed of industrial c...
|
 |
Al-PVC End Milling Machine
Parameters and specifications: 1) Harshness: Ra 12.5? m 2) Power supply: 380V, 50Hz (three-phase, four-wire) 3) Motor power: 1.5k W 4) Rotary speed: 2,800rpm 5) Air pressure: 0.5-0.8MPa 6) Max. diameter of milling cutter: 200mm 7) Max. milli...
|
 |
Cast Steel 2pc Trunnion Mounted Ball Valve Set
* Design/manufacture standard: ASME B16.34, API 6D, ISO14313, BS 5351, API 608 * Connection end standard: ASME B16.5, ASME B16.25, ASME B16.47, ASME B16.11 * Test standard: API 598, API 6D, ISO5208, BS 6755, API 598 * Size: 2 -14 * Pressure class...
|
 |
Satellite Wheel
If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP....
|
 |
H-Type Steel Auto-Welding Machine
The auto-welding machine for H-type steel accepts the AC frequency converter to control speed with the merits of stable and reliable running and quick returning. It uses the auto-arc tracing and centering device to ensure the welding gun being auto and co...
|
 |
Automatic Welding Center
The center is used in the pressure vessels, freezing equipment, construction of power stations, metallurgical, engineering machinery, marine buildings, cladding of rolled rollers and petrochemical industries. The welding center consists of the welding m...
|
